Request for more information

  • MLC - NAND flash technology
  • 2.5¨ standard SATA II SSD form-factor
  • Capacity up to 256GB
  • Support Fast Erase by Hardware and Software definition
  • Support Secure Erase by Software ATA command vendor code
  • Extremely rugged mtal casing to endure harsh environments
  • 7-pin (data) + 15-pin (power) SATA interface
  • Support SATA I/II (1.5/3.0Gbps) interface
  • High performance and High reliability
  • Low power consumption
  • Available in standard (0°C - 70°C) and Extended Temperature (-40°C - +85°C)

back to menu

Compatibility SATA 1.0a and SATA 2.6 specification compliance
Flash technology MLC-NAND Flash
Form-factor Rugged Metal 2.5¨ SATA SSD
Host Interface SATA 7-pin (data) + 15-pin (power)
Performance
Data transfer mode Serial ATA Gen-I and Gen-II (1.5Gb/s and 3.0Gb/s)
Sequential read 167.8MB/sec (Max.)
Sequential write 92.1MB/sec (Max.)
Average access time 0.1ms
Environmental specification
Operating temperature Standard: 0°C ~ 70°C
Extended: -40°C ~ 85°C
Humidity 10% ~ 95% non-condensing
Vibration 15G compliance to MIL-STD-810F
Shock 1,500G compliance to MIL-STD-810F
Altitude 70,000 feet
Functionality
Hardware Fast Erase the media data by hardware trigger
Software - Fast Erase the media data by ATA command vender code
-Secure Erase the media data by ATA command vender code
Power consumption
Power requirement +5.0V + 10%
Reading mode 450mA (Max.)
Writing mode 500mA (Max.)
Sleeping mode 320mA (Max.)
Reliability
Wear-leveling Static wear-leveling algorithms
ECC Supports BCH ECC 8-bits or 15-bits per 512bytes block
Data retention 10 years
Endurance >2,000,000 cycles
Physical specification
Weight 115g
Dimension(W x L x H) 69.90 x 99.70 x 9.50 (mm)

back to menu

* Represents Mandatory Fields
Please contact us by sending a message using the form below:
First Name *
Last Name
Company*
Phone
Email Address *
Product Description*

Comment/Question *

 
 
       

back to menu