ATA Flash PC Card

Industrial ATA Flash PC Card

MagicRAM Industrial Grade ATA Flash is a high capacity, high performance storage solution built with SLC NAND Flash components for industrial, medical and military applications.

MagicRAM industrial ATA Flash supports full IDE hard disk emulation with bootable capability and features super low power consumption and zero-power data retention.

MagicRAM’s ATA Flash solutions are well suited for embedded and cross platform data transfer applications. The use of NAND-based Flash devices provides true random access and wear leveling algorithms evenly distribute write/erase operations, maximizing card life.

  • SLC-NAND flash type technology
  • Compatible with PC card standard and PCMCIA V.2.1
  • Compatible with ATA/APAPI-6 standard
  • PCMCIA Type II form-factor
  • Optional for standard casing and rugged metal casing
  • Capacity from 128MB up to 16GB
  • Data transfer mode support PIO 0~6 and UDMA 0~5
  • Performance up to 40MB/sec
  • MTBF (Mean Time Between Failure) > 3,000,000 hours

back to menu

Compatibility ATAPI-6 and True IDE mode
Flash Technology SLC-NAND flash type technology
Form-factor PCMCIA Type II
Host Interface 68 pins
Performance
Data transfer mode PIO-4 mode or UDMA-4 mode (Default setting)
Data transfer rate 66.6MB/sec under UDMA-4 mode
16.6MB/sec under PIO-4 mode
Sequential read 40 MB/sec (Max. /with dual channel)
Sequential write 17 MB/sec (Max. /with dual channel)
Average access time 0.2ms (estimated)
Environmental specification
Operating temperature Standard: 0C - +70C
Extended: -40C - +85C
Non-operating temperature Standard: -20C - +80C
Extended: -50C - -95C
Humidity 10% ~ 95% non-condensing
Acoustic noise 0dB
Vibration 15G compliance to MIL-STD-810F
Shock 500G compliance to MIL-STD-810F
Altitude 70,000 feet
Power consumption
Power requirement +5V + 10% / +3.3V + 5%
Reading mode 1 Channel 78mA(Max.)
2 Channel 124mA(Max.) UDMA4 Mode
Writing mode 1 Channel 67mA(Max.)
2 Channel 121mA(Max.) UDMA4 Mode
Sleeping mode 1 Channel 1.2mA(Max.)
2 Channel 1.8mA(Max.) UDMA4 Mode
Reliability
Wear-leveling Static wear-leveling algorithms
MTBF > 3,000,000 hours
ECC Enhanced management 4-bits per 512bytes block
Endurance > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad sector management algorithms
Data reliability < 1 non-recoverable error in 1014 bits read
Data retention 10 years
Physical specification
Weight (max.) 43.0g/ 1.52oz
Dimension (W x L x H) 85.6 x 54.0 x 5.0 (mm)
Conformal coating Option for special request

back to menu

* Represents Mandatory Fields
Please contact us by sending a message using the form below:
First Name *
Last Name
Company*
Phone
Email Address *
Product Description*

Comment/Question *

  
 
       

back to menu