| 3.5" floppy disk /
3.5" hard disk footprint |
2.5" hard disk
footprint |
| |
|
| Supported Cards: |
Supported Cards: |
| * Type I/II/III
68-pin PCMCIA ATA Cards with IDE mode |
* Type I/II/III
68-pin PCMCIA ATA Cards with IDE mode |
| » ATA Flash
Card |
» ATA Flash
Card |
| » CompactFlash
with an adapter |
» CompactFlash
with and adapter |
| » Type II/III
PC Card Hard Drives |
» Type II/III PC Card Hard Drives |
| |
|
| Environment: |
Environment: |
| * Operating:
-40 ºC to +85 ºC |
* Operating:
-40 ºC to +85 ºC |
| * Storage: -40
ºC to + 85 ºC |
* Storage: -40
ºC to +85 ºC |
| |
|
| Power Supply
Requirements: |
Power Supply
Requirements: |
| * 5 VDC, 0 mA
without PC Cards |
* 5 VDC, 0 mA
without PC Cards |
| |
|
| Indicator LED's: |
Indicator LED's: |
| * Busy
(Read/Write) |
* DASP (drive
access) |
| |
|
| Board Addressing: |
Board Addressing: |
| * Master or
Slave |
* Master or
Slave |
| |
|
| Interface Connectors: |
Interface Connector: |
| * 40-pin IDE,
4-pin power |
* 44-pin, 2mm,
IDE |
| |
|
| System Requirements: |
System Requirements: |
| * Host computer
with an IDE controller |
* Host computer
with an IDE controller |
| * Any operating systems which supports an IDE Hard Disk |
* Any operating systems which supports an IDE Hard Disk |
